收藏本站|Message|Sitemap中文Englishwelcome to visit our website!
Location: Home > 新闻动态 > 行业新闻 > 正文

Precautions for worm gear reducer before installation

Pubdate:2018-05-12 11:13:19   Hits:1586   【Large Moderate Small
Before installing worm gear reducer, matters needing attention:

1. the machine should be cleaned before installation. And check whether there are bruises and dirt on the installation shaft, if all should be cleaned.

2. the use temperature of the reducer is 0~40 C.

3. check whether the matching dimensions of the coupling hole of the reducer and the reducer meet the requirements, and the hole tolerance should be H7.

4. Before use, the plug at the highest position should be replaced by the exhaust plug to ensure that the gas in the body is discharged when the reducer is running.